Salon Dryer Parts: Belvedere, Belmont/Koken, Collins

Phone: 870-972-5300

Shopping Index Wholesale

Shopping!

Appliances

Hair

Manicure

Mirrors

Shears

Style&Finish

Product Categories

Equipment: Salon Dryer Parts

Belvedere Dryer Parts
Koken/Belmont Parts
Jeffco Parts
Collins Parts
Shampoo Bowl Fixtures & Parts
Chair Back & Arm Covers
Barber Pole Parts
Hair Clipper Blades & Parts

Salon Dryer Parts

Manufactures of Professional Salon Dryers and Parts

Belvedere, Collins,Kaemark & Koken/Belmont, Jeffco

*******************************************

Belvedere

*******************************************

Click here for further information on Belvedere Dryer Parts

item # 000062337580003

Dryer Part: Balance Spring
* 5/8" Wide 1" Diameter

by Belvedere

Salon Dryer Part: Balance Spring
* 5/8" WIDE 1" Dia. with "U" shape end to attach to inner stack
* A metal spring that clips on the inner stack that holds tension against the outer stack.
* It allows you to place the dryer hood at the height you desire

* Fits: All Belvedere Dryer Models, old Naturelle Advant Garde, Zotos and Helen Curtis Dryers

See item #32 on schematic

$ 21.97

2 - 5 * $ 20.97 each

6 or more * $ 19.97

See Parts Schematic Here

"This item is non-returnable."

Dryer Part: Balance Spring

*******************************************

item # 2009177

DRYER PART:

NEGATOR SUPPORT for BALANCE SPRING

NEGATOR SUPPORT
* a 5/8" wide x 1-7/16" long metal part that clips on the outer stack to hold the balane spring in place as the stack moves up & down

* Fits: All Belvedere Dryer Models, old Naturelle Advant Garde, Zotos and Helen Curtis Dryers

See Parts Schematic Here

"This item is non-returnable."

DRYER PART: NEGATOR SUPPORT for BALANCE SPRING $ 9.99

*******************************************

Dryer Part: Heating Element

by Belvedere

Fits: Belvedere #9501A & 9507C Avant Garde Plus Dryer,

B900 & B900C Mega Dryer and B700 Real Hot Dryers

* These Dryers get Hotter (UL/CUL Listed. 120 Volts, 10 Amps., 1030 Watts)
* Spring Coil Heating Element on Orange Board
* Thermal Limiter Included

* item #14 on schematic

MPC: 20012671SV

See Parts Schematic Here

Dryer Part: Heating Element *Fits 9501A $ 83.97

*******************************************

Dryer Part: Limiter

by Belvedere

* This part attaches to the HEATER ASSEMBLY

* Thermal Limiter ( keeps dryer for over heating)

Fits: Belvedere Dryer Model # B810, B700 Real Hot, B900 Mega,
9500A, 9501A, 9507B

See Parts Schematic Here

Dryer Part: Limiter $ 19.97

*******************************************

Dryer Part: Timer

by Belvedere

Fits: Belvedere Dryer Model # B810, B870 First Lady, B700 Real Hot, B900 Mega, 9500A, 9501A, 9507B

See Parts Schematic Here

Dryer Part: Timer $ 54.99

*******************************************

Dryer Part: Heat Control Switch

by Belvedere

Fits: Belvedere Dryer Model # B810, B870 First Lady, B700 Real Hot, B900, B900C Mega, 9500A, 9501A, 9507B & 9507C

New Style Switch:
This new switch started to be used on the Belvedere Dryers as well as a replacement switch about May 2013
* 4 Post * all 4 are used
* 4 - Wires, one to each post: Orange, Yellow, Blue & White
* Overall Measures: 1-1/4" length x 1-1/4" wide x 1" Tall
* Printed on top of switch:
271-97-190
1/4 H.P. 120-240 VAC
13A 120 VAC

Note:
Mounting to some of the oldest Belvedere Dryers will require some retro fitting, such as filing out the hole to accommodate the larger collar.
Some instructions will be sent with new switch.

** FINAL SALE ***

for Reference ONLY:
Old Switch (NOT SHOWN)
* 5 Post * but Usually only 4 used
* Measures: 1-3/8" length x 1-3/4" wide x 1-3/4" Tall
* Printed on side of switch:
271-97-190
1/2 H.P. 120-240V.A.C.
15A . 125V.A.C.
7.5A. 250V.A.C.

See Parts Schematic Here

Dryer Part: Heat Control Switch $ 47.99

*******************************************

#444428510444

Dryer Part: Slide Collar for Duct - Black

by Belvedere

* This is the Plastic part that fits between the Dryer cabinet and the Stack that allows the stack to move back and forth

* Fits: Belvedere Dryer Model # B810, # B870 First Lady, B700 Real Hot, B900 Mega, 9500A Avant Garde, 9501A Avant Garde Plus Salon Dryers
* Also Fits Old Helen Curtis, Naturelle and Zotos Salon Dryers

* Overall Dimensions: 3-7/8" x 9"
* Stack Opening: 3-3/8" x 2-1/2"
* Black Plastic

Installing Slide Collar Instructions

See Parts Schematic Here

Dryer Part: Slide Collar $14.99

*******************************************

Dryer Part: Outer Duck Assembly - Black

by Belvedere

* This the part that slides up and down and connects to the Outer Hood
* Fits Belvedere, Avante Garde # B810, Avante Garde Pluse Dryer Model # 9501A, #9500A and Mega Dryer Model # B900

See Parts Schematic Here

Dryer Part: Outer Duck Assembly $ 49.99

*******************************************

Dryer Part: Cotter Pin fits all Belvedere Dryers

by Belvedere

* This Split Pin Attaches the Inner Stack to the Blower Housing
* Material: Metal
* Color: Chrome
* After Pin is inserted through inner stack and blower housing the End is spread apart to hold pin in place
See Parts Schematic Here

Dryer Part: Cotter Pin $ 5.00

*******************************************

Filter for Large Salon Dryer

by Belvedere

FILTER for LARGE SALON DRYER
* Over All Dimensions 22-1/4" Long X 10-1/4" Wide x 3/16 thick
* Fits NEW Belvedere # 9507C Avant Garde Plus Dryer * AKA: Large Box Dryer
* Fits: Old Helen Curtis, Zotos, Central Beauty Equip., and others ( check dimension

* Fits: 1994 and before Belvedere Dryers like model # 9500A Avant Garde, # 9501A Avant Garde Plus Dryers and Some Brentwood dryers
* Fits: Central Beauty Equipment Dryer model # E-37411
* Some old Filters have plastic frame some have metal frame.

* This is a metal frame Filter

* THIS FILTER fits in the BACK of the DRYER

1 filter $ 41.99

2 filters @ $ 38.99 each

3 - 5 filters @ $ 37.99 each

6 or more filters @ $ 35.99 each

Filter for Large Salon Dryer

*******************************************

KOKEN / TAKARA BELMONT

*******************************************

Click here for further information on Koken/Belmont Dryer Parts

Top Bottom

Dryer Part: Knob for Koken Venus
Model # HM-1000

by Koken/Belmont

* Knob Only
* Fits Timer or Temperature control

Some simple modification may be required.

Detailed View of Dryer and Parts

Dryer Part: Knob for Koken Venus $ 9.99

*******************************************

Dryer Part: Timer for Koken Venus
Model # HM-1000

by Koken/Belmont

* Old Style Replacement Timer Only * 60 Minute

* Fits Koken/Belmont Venus and Gemini Shop Dryers with Model # HM-1000 and HM-1500 that is Made in USA with "HM" in the Model Number
* Fits Highland Select Dryers models HM-1000, HM-1500, HM-1070, HM-1200, HM-1550, HM-1570
* Fits: Collins Comfort Aire Dryers 2000B, 2000W, 2050B, 2100B & 2200B
* Fits Jeffco discontinued Shop Dryer Models # K7, # K26, & # J316T
* Fits Jeffco Shop Dryer Model J316 prior to 08-23-2012
* Fits Jeffco Shop Dryer Model J316x prior to 10-22-2012
* Fits: Kaemark #1570H Ion, #1990-G Kwik Set and #2000 Heat Wave Dryers
* Fits some Sally's Salon Mate dryer (look for the Model number on the back panel)
* Fits many more brand name Dryers
* Look for the Model # HM-1000 or HM-1500 on the manufactures plate on back of dryer towards the bottom
* Has 3 Post and 2 Wires on bottom
* Dimensions: 2-1/4" tall x 1-3/4" wide dia.

* Note: Does NOT fit Venus Dryer made in Costa Rica with "C" in the Model # and imported in beginning in 2004 by Takara/Belmont/Koken. You may Order that Timer by searching our web site for: Dryer Part: Timer for Koken Venus Model # C-608, item #60801105

Detailed View of Dryer and Parts
Replacement Assembly Instructions

Dryer Part: Timer for Koken Venus #HM-1000 $ 88.99

*******************************************

DRYER PART: TIMER

* Fits All Dryer Models * with model numbers HM-1000 & HM-1500

* Timer Only
* Replaces black/silver Mallory timer
* Dimension: 2-1/8" w X 2-3/4" L X 1-3/4" T w/5-Post
* Fits: Koken/Belmont Venus and Gemini Shop Dryer Model
# HM-1000 & HM-1500
* Fits: Collins Dryer Models # 2000B, 2000W, 2050B and 2100B
* Fits: Jeffco Shop Dryer Models (before 10/22/12) # K7, # J316, # J316T & # J316x
* Fits: Kaemark KwikSet Dryer #1990-G, Kaemark KwikSet Ion Dryer #1570H & Kaemark KwikSet Heat Wave Dryer #2000
* Fits: Highland Dryers that is Made in USA with "HM" in the Model #
* Fits: Highland Liberty, Patriot Dryers model #'s HM-1500 & HM-1000
* First used on HM model dryers mfg after March 1st 2013
* REPLACEMENT Timer for old black/silver round Mallory timers
* Includes: REPLACEMENT Timer with Instruction and Knob

SEE INSTRUCTIONS ON UPDATING TIMER HERE

** DOES NOT Fit Venus Dryer that is Made in Costa Rica with "C" in the Model #

$ 49.99

*******************************************

Dryer Part: Timer for Koken Venus
Model # C-608

by Koken/Belmont

* Timer Only
* Fits Koken / Takara Belmont Venus Dryer Model # C-608
* Fits Dryer that is Made in Costa Rica with "C" in the Model #
* Fits most Venus Dryers imported in beginning in 2004
* Has 4 Post
* Dimensions: 2-1/2" tall x 1-3/4" wide

NOTE:
This Replacement Timer Dose NOT mount by the nut around the collar. It will mount to the dryer by Two (2) screws (included).
To install this replacement timer you will need to drill two 3/16" holes 9/16' from the center of the shaft opening.

Item in stock ready to ship

Dryer Part: Timer for Koken Venus #C-608 $ 73.37

*******************************************

DRYER PART *KNOB KOKEN/BELMONT VENUS # C-608

* Knob Only
* Fits Koken / Takara Belmont Venus Dryer Model # C-608
* Fits Dryer that is Made in Costa Rica with "C" in the Model #
* Knob fits Timer and Thermostat
* One Only Knob

DRYER PART *KNOB KOKEN/BELMONT VENUS # C-608

* No Longer Available

See Similiar Knob Here

*******************************************

item # 60701111A

Dryer Part: Thermostat

for Koken Venus
Model # HM-1000 & # HM-1500

by Koken/Belmont

* Thermostat Only

* Fits Koken/Belmont Venus and Gemini Shop Dryers with Model # HM-1000 and #HM-1500
* Fits: Collins Comfort Aire Dryers 2000B, 2000W, 2050B, 2100B & 2200B
* Fits: Kaemark #1570H Ion, #1990-G Kwik Set and #2000 Heat Wave Dryers
* Fits many more brand name Dryers
* Look for the Model # HM-1000 or #HM-1500 on the manufactures plate on back of dryer towards the bottom
* Fits Jeffco Dryer Model # J316
* Fits Venus Dryer that is Made in USA with "HM" in the Model #
* Fits Venus Dryer that is Made in Costa Rica with "C" in the Model #

$ 33.97

2 - 5 * $ 33.49 each

6 or more * $ 32.97

Detailed View of Dryer and Parts
Replacement Assembly Instructions

Dryer Part: Thermostat for Koken Venus

*******************************************

Dryer Part: Thermostat/ Bundyweld Assembly for Salon Hair Dryers
by Koken/Belmont

* Thermostat Bundyweld Assembly Only
* Includes: Thermostat, Bundyweld (This is the Tube that connects the Knob on the top of dryer to the Thermostat) and the small Cotter Pin (Clip that holds the Bundyweld Tube to the thermostat)

* Fits Koken/Belmont Venus and Gemini Shop Dryers with Model # HM-1000
* Fits: Collins Comfort Aire Dryers 2000B, 2000W, 2050B, 2100B & 2200B
* Fits: Kaemark #1570H Ion, #1990-G Kwik Set and #2000 Heat Wave Dryers
* Fits many more brand name Dryers
* Look for the Model # HM-1000 on the manufactures plate on back of dryer towards the bottom
* Fits Jeffco Dryer Model # J316
* Fits: Kaemark KwikSet Dryer #1990-G, Kaemark KwikSet Ion Dryer #1570H & Kaemark KwikSet Heat Wave Dryer #2000
* Fits Venus Dryer that is Made in USA with "HM" in the Model #
* Fits Venus Dryer that is Made in Costa Rica with "C" in the Model #

Detailed View of Dryer and Parts
Replacement Assembly Instructions

Dryer Part: Thermostat/Bundyweld Assembly $ 45.00

*******************************************

Dryer Part: Bundyweld Tube

* Bundyweld Tube Only
* This is the Tube that connects the Knob on the top of dryer to the Thermostat
* You May Also Need small Cotter Pin (Clip that holds the Bundyweld Tube to the thermostat) ** NOT INCLUDED ****

Dryer Part: Bundyweld Tube $ 14.95

*******************************************

Dryer Part: Cotter Pin

* Small Cotter Pin Only
* Small Cotter Pin Clip holds the Bundyweld Tube to the Thermostat

Dryer Part: Cotter Pin $ 3.79

*******************************************

Dryer Part * Motor Assembly * Koken Venus
Model # HM-1000 and HM-1500

by Koken/Belmont

Will This Fit My Dryer ???

This Motor will Only Fit Large Salon Dryers with Model # HM-1000 and HM-1500 !!! Where can I find the model number of my dryer ? Look on the Back of the Dryer, the manufactures production tag is usually on the bottom right or bottom left on the back of the dryer.

If it states "Model HM-1000" or "Model HM-1500" then this motor will fit your dryer.

* Motor and Blower Wheel This Motor Fits Many Brand name dryers see listing of some brands below.

Fits Salon Dryers with Model # HM-1000 and HM-1500 / Fits: Koken/Belmont Venus and Gemini Shop Dryer Model # HM-1000 and HM-1500, Collins Comfort Aire Dryers 2000B, & 2000W / Fits: Kaemark #1570H Ion, #1990-G Kwik Set and #2000 Heat Wave Dryers / Fits many more brand name Dryers / New dryers since Augusta 2011 have this New Aluminum Blower Wheel / If your dryer was produced prior to Augusta 2011 it may have the Black Plastic Blower Wheel

** This will replace the Motor with the Black Plastic Blower wheel on the HM-1000 and HM-1500 model dryers Old motor with Black Plastic Blower Wheel shown in picture, on right, for reference.

Note: The old plastic fan blade (blower wheel) would have to be replaced in a few years because the operator would shut off the dryer and therefore not allowing the dryer to go thru it designed "Cool Down Cycle". Thus the heat in and around the motor would be absorbed in to the plastic fan blade making it weak and brittle before its life expectance. Therefore the New Aluminum engineered fan blade was developed !

Detailed View of Dryer and Parts
Trouble Shooting Guide and Replacement Assembly Instructions

Click here to see High Performance Motor Below

Do I need a Motor ?

Two indications that you may need a new motor are a "Buzzing" sound and/or no movement of air (motor will not or does not turn)

Dryer Part: Motor Assembly for Koken Venus $ 119.99

*******************************************

#60701123

Dryer Part: Fan Blade for Koken Venus
Model # HM-1000

by Koken/Belmont

* Fan Blade Only (impeller or Blower Wheel) with Metal Push Nut
* Molded in Back of Fan Blade (Blower Wheel) name
"THORGREN VALPARAISO IN."
"5 X 1.25 SB"

* Description 5" Diameter 1.25" Width,
* 12 Blades Only on one side that run from out side to center (2-1/8" long) with blade on a taper 1" from center
* Black Plastic

* Fits Motor that has "D" Shape Shaft (Center of Fan Blade has "D" Shape)

* Fits Koken/Belmont Venus and Gemini Shop Dryers with Model # HM-1000, HM - 1500
* Fits: Collins Comfort Aire Dryers 2000B, 2000W, 2050B, 2100B & 2200B
* Fits: Kaemark #1570H Ion, #1990-G Kwik Set and #2000 Heat Wave Dryers
* Fits many more brand name Dryers
* Look for the Model # HM-1000 on the manufactures plate on back of dryer towards the bottom

Detailed View of Dryer and Parts

$ 26.99 each

Buy 2 @ $ 25.99 each

Dryer Part: Fan Blade for Koken Venus

********************************************

#60701124118

Dryer Part: Aluminum Fan Blade

fits Koken Venus Salon Hair Dryer
Model # HM-1000

by Koken/Belmont

*** NEW Design ***

NEW ! engineered for longer lasting life.
The New HM-1000 and HM-1500 Dryers have this fan since 08/01/11
* All Aluminum Fan Blade (Blower Wheel) with Allen Wrench
* Overall Dimension: 4-5/8" Dia. 1.25" Width,
* 11 Blades Only on one side that run from out side to center (1-1/2" long) with blade on a taper 11/16" from center
* Fits Motor that has "D" Shape Shaft (Center of Fan Blade has "D" Shape)
* Fastens to Motor Shaft with a Allen set screw.
* Long Handel Allen Wrench supplied for install
* Fits Koken/Belmont Venus Shop Dryer Model # HM-1000, HM-1500, Collins Comfort Aire Dryers 2000B, 2000W, 2050B, 2100B & 2200B
* Also Fits Jeffco Shop Dryer Models # K7 & # J316, J316t and J316x
* Fits many other brand names
* How to find out if this will fit your dryer !!!
"Look" for the Model # HM-1000 or HM-1500 on manufacture's plate on the back towards the bottom of the dryer.

* Aluminum

Note:The old plastic fan blade (blower wheel) would have to be replaced in a few years because the operator would shut off the dryer and therefore not allowing the dryer to go thru it designed "Cool Down Cycle". Thus the heat in and around the motor would be absorbed in to the plastic fan blade making it weak and brittle before its life expectance.
Therefore the New Aluminum engineered fan blade was developed !

Dryer Part: Aluminum Fan Blade $ 38.99

********************************************

Dryer Part: Heating Element for Koken Venus
Model # HM-1000

by Koken/Belmont

* Heating Element Only

* Fits Koken/Belmont Venus and Gemini Shop Dryers with Model # HM-1000
* Fits: Collins Comfort Aire Dryers 2000B, 2000W, 2050B, 2100B & 2200B
* Fits: Kaemark #1570H Ion, #1990-G Kwik Set and #2000 Heat Wave Dryers
* Fits many more brand name Dryers
* Look for the Model # HM-1000 on the manufactures plate on back of dryer towards the bottom
* Fits Also Jeffco Brand Dryer Model # K-7 may also have # HM 1500 on the back of dryer

* Fits Dryer that is Made in USA with "HM" in the Model #
* Fits Dryer that is Made in Costa Rica with "C" in the Model #

Detailed View of Dryer and Parts

Dryer Part: Heating Element $ 28.99

********************************************

Dryer part * Hi-Performance

* Motor Assembly *

fits Model # HM-1550

by Koken/Belmont

* Motor and Plastic Blower Wheel with Aluminum Fins on one side
* fits: Dryers with Model # HM-1550

* Look for the "Manufacture's Production Tag" on the back of the dryer sometimes towards the bottom of the dryer. The Model Number should be on that tag (label).
* This Motor for Hi-Performance Dryers ONLY! with "HM-1550" in the model number

* Fits: Koken Venus 1550, Freedom HD-1550, Collins Hot Spot #2100B, ModeCraft 1000 and Kaemark 2000 Heat Wave Salon Dryers

Dryer Part Hi Performance Motor Assembly $ 122.50

********************************************

DRYER PART*HEATING ELEMENT*VENUS MODEL # HM-1500HP

by Koken/Belmont

* for Hi-performance Dryer
* Straight Heating Element Only
* Fits Koken/Belmont Venus Shop Dryer Model # HM-1500 HP * HIGH PERFORMANCE
* Fits: Collins Comfort Aire Dryers 2100B
* Fits Dryer that is Made in USA with "HM" in the Model #
* DOES NOT Fit Dryer that is Made in Costa Rica with "C" in the Model #

Detailed View of Dryer and Parts

Dryer Part: Heating Element for High Performance Dryers $ 22.99

********************************************

Dryer part*Thermo Disc HP*Venus Model # HM-1500 HP
for Hi-performance Dryer

by Koken/Belmont

* for Hi-performance Dryer
* Thermostat Only * controls small heating element
* Fits Koken/Belmont Venus Shop Dryer Model # HM-1500 HP * HIGH PERFORMANCE
* Collins Comfort Aire Dryers 2100B
* Fits Dryer that is Made in USA with "HM" in the Model #
* DOES NOT Fit Dryer that is Made in Costa Rica with "C" in the Model #

Detailed View of Dryer and Parts

Dryer Part: Thermo Disc for High Performance Dryers $ 26.99

********************************************

Dryer Part: Hood & Main Stack for Koken Venus Model # HM1000

by Koken/Belmont

* Outer Hood, Inner Hood, Hood Band, Elbow & Main Stack All Together
* This is the Everything from the Dryer Up
* Outer stack assembly has a diameter of 3-1/8"X2-5/8". This part fits over inner stack assembly

This item can not be shipped by air unless additional shipping charges are added. The added charges will depend on dimensional weight and destination

Detailed View of Dryer and Parts

Dryer Part: Hood & Main Stack $ 147.99

********************************************

Dryer Part: Hood Band

by Koken/Belmont

* Hood Band Only
* Fastens inner and outer hood together
* Fits Koken/Belmont Venus and Gemini Shop Dryers with Model # HM-1000 and Model # HM-1500
* Fits: Collins Comfort Aire Dryers 2000B, 2000W, 2050B, 2100B & 2200B
* Fits: Kaemark #1570H Ion, #1990-G Kwik Set and #2000 Heat Wave Dryers
* Fits many more brand name Dryers
* Look for the Model # HM-1000 or HM-1500 on the manufactures plate on back of dryer towards the bottom
* Black Plastic

Light Color ALUMINUM

* 45.75" LONG

Dryer Part: BLACK PLASTIC Hood Band $ 22.99

Dryer Part: ALUMINUM Hood Band $ 24.00

*******************************************

Rollover For Detailed View

Dryer part * DRYER HOOD SPRING

* Dryer Hood SPRING Only
* 1/2" x 2-1/2" Coil Spring with hooks on each end
* Overall Length 4"
* This is the part that helps hold the hood back.
* AKA: Elbow Spring
* Fits Koken/Belmont Venus and Gemni Shop Dryer Model # HM-1000 & HM-1500 and Collins Dryer Models # 2000B, 2000W, 2050B and 2100B

* Fits: Kaemark #1570H Ion, #1990-G Kwik Set and #2000 Heat Wave Dryers
* Fits many more brand name Dryers
* Look for the Model # HM-1000 on the manufactures plate on back of dryer towards the bottom
* Fits Jeffco Dryer Model # J316
* Fits Kaemark KwikSet Dryer #1990-G, Kaemark KwikSet Ion Dryer #1570H & Kaemark KwikSet Heat Wave Dryer #2000
* Fits Venus Dryer that is Made in USA with "HM" in the Model #
* Fits Venus Dryer that is Made in Costa Rica with "C" in the Model #

Dryer part * DRYER HOOD SPRING $ 7.99

*******************************************

Dryer Part: Outer Hood for Koken Venus
Model #HM-1000

by Koken/Belmont

* Fits Koken/Belmont Venus Shop Dryer Model # HM-1000, Collins Comfort Aire Dryers 2000B, 2000W, 2100B & 2200B
* Fits: Kaemark #1570H Ion, #1990-G Kwik Set and #2000 Heat Wave Dryers
* Look for the Model # HM-1000 or HM-1500 on the manufactures plate on back of dryer towards the bottom
* May fit many other Brands as this manufacture produces this dryer under may Brand names but all will have same model numbers # HM-1000 or # HM-1500
* See Dimensions below to determine if this hood will fit your dryer
* Bolts on to dryer stack neck at 8 points
* bolt holes measures: 1-15/16" apart
* Hood Measuring across the bottom: 14-7/8" Dia.
* Smoke Color Plastic
* Outer Hood ONLY

This item can not be shipped by air unless additional shipping charges are added. The added charges will depend on dimensional weight and destination

Detailed View of

Dryer Part: Outer Hood for Koken Venus $ 59.99

*******************************************

Dryer Part: Screws for Hood Mounting
Model #HM-1000

by Koken/Belmont

* Fits Koken/Belmont Venus Shop Dryer Model # HM-1000, Collins Comfort Aire Dryers 2000B, 2000W, 2100B & 2200B

* Fits: Kaemark #1570H Ion, #1990-G Kwik Set and #2000 Heat Wave Dryers
* Fits many more brand name Dryers
* Look for the Model # HM-1000 on the manufactures plate on back of dryer towards the bottom
* Bolts on the Outer Hood to neck at 8 points
* Size: 6-32 X 9/16" Long
* Shape: Pan Head Phillips Machine Screw
* Color: Silver
* Material: Steel, Nickel Plated
* (8) ONLY SCREWS (Bolts)

Detailed View of Dryer and Parts

Dryer Part: Screws for Outer Hood $ 4.48

*******************************************

Dryer Part: Nuts for Hood Mounting
Model #HM-1000

by Koken/Belmont

* Fits Koken/Belmont Venus Shop Dryer Model # HM-1000, Collins Comfort Aire Dryers 2000B, 2000W, 2100B & 2200B

* Fits: Kaemark #1570H Ion, #1990-G Kwik Set and #2000 Heat Wave Dryers
* Fits many more brand name Dryers
* Look for the Model # HM-1000 on the manufactures plate on back of dryer towards the bottom
* Bolts on the Outer Hood to neck at 8 points
* Size: Ac-632 N
* Shape: Acorn Type M
* Style: Ac* Color: Silver
* Material: Steel, Nickel Plated
* (8) ONLY NUTS

Detailed View of Dryer and Parts

Dryer Part: Nuts for Outer Hood $ 4.48

*******************************************

Dryer Part: Inner Hood for Koken Venus
Model #HM-1000

by Koken/Belmont

* Fits Koken/Belmont Venus Shop Dryer Model # HM-1000, Collins Comfort Aire Dryers 2000B, 2000W, 2100B & 2200B

* Fits: Kaemark #1570H Ion, #1990-G Kwik Set and #2000 Heat Wave Dryers
* Fits many more brand name Dryers
* Look for the Model # HM-1000 on the manufactures plate on back of dryer towards the bottom
* Description: Item is Fasten on to outer hood with hood band (purchase separate)
* Smoke Color Plastic with holes
* Inside Diameter 12"
* Depth 7-1/2"
* Inner Hood ONLY

This item can not be shipped by air unless additional shipping charges are added. The added charges will depend on dimensional weight and destination

Detailed View of

Dryer Part: Inner Hood for Koken Venus $ 48.99

*******************************************

Dryer Part: Inner Stack Assembly for Koken Venus
Model #HM-1000

by Koken/Belmont

* Fits Koken/Belmont Venus Shop Dryer Model # HM-1000, Collins Comfort Aire Dryers 2000B, 2000W, 2100B & 2200B

* Fits: Kaemark #1570H Ion, #1990-G Kwik Set and #2000 Heat Wave Dryers
* Fits many more brand name Dryers
* Look for the Model # HM-1000 on the manufactures plate on back of dryer towards the bottom
* Inner stack has metal coil spring on side to hold up main stack
*Inner stack assembly opening dimension is 3-1/16"X 2-1/2"
* This is the only way to get the level (Balance) spring
* Spring is NOT available by itself

Detailed View of Dryer and Parts

Dryer Part: Inner Stack Assembly for Koken Venus $ 19.75

*******************************************

Dryer Part: Polly Slide Collar for Koken Venus
Model #HM-1000

by Koken/Belmont

* Fits Koken/Belmont Venus Shop Hair Dryer Model # HM-1000, Collins Comfort Aire Dryers 2000B, 2000W, 2100B & 2200B

* Fits: Kaemark #1570H Ion, #1990-G Kwik Set and #2000 Heat Wave Dryers
* Fits many more brand name Dryers
* Fits All Salon Hair Dryers with "HM-1000" printed on production plate
(Production plate found on bottom of the back of the dryer)

* Slide Collar for Outer Stack
* This is the Plastic part that fits between the Dryer cabinet and the Stack that allows the stack to move back and forth
* Overall Dimensions: 4-1/2" x 9-1/2"
* Stack Opening: 3-3/8" x 2-7/8"
* Color: BLACK
* Material: Plastic

Detailed View of Dryer and Parts

Dryer Part: Polly Slide Collar for Koken Venus $ 8.75

*******************************************

Dryer Part: Polly Slide Springs

* Fits Koken/Belmont Venus Shop Hair Dryer Model # HM-1000, Collins Comfort Aire Dryers 2000B, 2000W, 2100B & 2200B

* Fits: Kaemark #1570H Ion, #1990-G Kwik Set and #2000 Heat Wave Dryers
* Fits many more brand name Dryers
* Fits All Salon Hair Dryers with "HM-1000" printed on production plate * Production plate (found on bottom of the back of the dryer)
* Polyslide Collar SPRINGS ( 2 in pack)
* This is the Metal part (Spring Steel) that fits undernaeth the PolySlide Collar that holds tension against the polyslide collar that allows the collar to stay in place yet slide back and forth.
* Overall Dimension: 1/2" x 5-3/4"
* Color: Steel
* Material: Spring Steel
*HDP #1055

Detailed View of Dryer and Parts

Dryer Part: Polly Slide Springs for Koken/Belmont Venus $ 16.59

*******************************************

Dryer Part: Elbow & Main Stack for Koken Venus Model # HM1000

by Koken/Belmont

* Elbow & Main Stack
* This is the Elbow (neck) part that fits on to the outer hood AND the Main Stack (outer stack) that slides over the inner stack
* Includes: Dryer Hood Spring
* Fits Koken/Belmont Venus and Gemini Shop Dryers with Model # HM-1000
* Fits: Collins Comfort Aire Dryers 2000B, 2000W, 2050B, 2100B & 2200B
* Fits: Kaemark #1570H Ion, #1990-G Kwik Set and #2000 Heat Wave Dryers
* Fits many more brand name Dryers
* Look for the Model # HM-1000 on the manufactures plate on back of dryer towards the bottom
* Connects to hood with 8 screws & nuts (NOT INCLUDED)
* Material: Black Metal

Detailed View of Dryer and Parts

Dryer Part: Elbow & Main Stack for Koken Venus $ 51.95

*******************************************

Collins Products

*******************************************

Click here for further information on Collins Dryer Parts

Dryer Part: Collins/Venus
Shop Dryer Filter

*** NO Frame *** JUST FILTER
* Dimension: 10" x 7" x 1/4"

* Fits: Koken/Belmont Venus Shop Dryer Model # HM-1000, Collins Comfort Aire Dryers 2000B, 2000W, 2050B, 2100B & 2200B

* Fits: Kaemark #1570H Ion, #1990-G Kwik Set and #2000 Heat Wave Dryers
* Fits many more brand name Dryers
* Look for the Model # HM-1000 on the manufactures plate on back of dryer towards the bottom

Also Fits: some Brentwood Hair Dryer

Detailed View of Dryer and Parts

Dryer Part: Collins/Venus Shop Dryer Filter $ 10.00

*******************************************

Filter for Collins / Venus Shop Dryer
with frame

* Dimension: 10" x 7"
* Fits: Koken/Belmont Venus Shop Dryer Model # HM-1000,
Collins Comfort Aire Dryers 2000B, 2000W, 2050B, 2100B & 2200B

Detailed View of Dryer and Parts

Filter for Collins / Venus Shop Dryer (with plastic frame) $ 13.99

*******************************************

60701643

Dryer Decal

* Decal Only
* Attaches to dryer body under Timer or Temperature control Knobs
* Fits Koken/Belmont Venus and Gemini Shop Dryer Model # HM-1000, Collins Comfort Aire Dryers 2000B, 2000W, 2050B, 2100B & 2200B, Kaemark Salon Dryers and many others
* Chrome / Black Decal

* Size: 3-3/8" wide x 5-3/8" long
* 1 Only

Time and Temperature Decal for HM-1000 Salon Dryer $ 9.99

*******************************************

DRYER PART * Convenience OUTLET

* Venus Model # HM-1000

* Fits Koken/Belmont Venus Shop Hair Dryer Model # HM-1000, Collins Comfort Aire Dryers 2000B, 2000W, 2100B & 2200B
* Fits All Salon Hair Dryers with "HM-1000" printed on production plate * Production plate (found on bottom of the back of the dryer)
* Convenience OUTLET
* This is the Electrical Outlet on the top of the dryer used to plug the manicure lamp into.
* Overall Dimension: 1-1/16" x 1-1/16"
* Color: BLACK
* Material: Plastic
* With 3 wires hooked up to it: Black, White & Green

DRYER PART * Convenience OUTLET * Venus Model # HM-1000 $ 16.75

*******************************************

Dryer Cart with Caster & Handle

"Dryer NOT Included"

DRYER CART with CASTERS & HANDLE hair dyrer on a cart

FITS:

* CABINET SIZE 12-1/4" Wide X 6-1/2" Deep X 23-1/2" High
* 2 - Wheel Cart with Handle (Only 10 screws to install cart)
* Fits Collins Comfort Aire, Koken Venus Dryers and Others
* Fits: Kaemark #1570H Ion, #1990-G Kwik Set and #2000 Heat Wave Dryers
* Fits many more brand name Dryers
* Look for the Model # HM-1000 on the manufactures plate on back of dryer towards the bottom
Link to Dryer Page
Link to Cart Assembly Instructions

Cart & Handle Assembly ( Fits Collins Salon Dryer ) $ 45.99

***********************************************************

Beauty or Barber Salon Hair Dryer Chair Dryer Retaining Clips pack of two

$ 12.00 Two(2) Clips

This is the fastener that holds the dryer in the back of the dryer chair
All Steel with a hole (for wood screw to go thru) also with two cleats on one end to "bite" into the wood of the chair to hold the clip firmly to the chair

* This is the part that screws onto the back of the dryer chair to hold the dryer in the back of the chair (Screws included)
* Measurement: 3/4" wide x 2" long x 1/16" thick
* Screw Hole is 3/16" dia. and is centered 5/8" from "cleat" end and 3/8" from side
* Material: STEEL
* Two (2) only Clips (usually two clips needed per dryer chair)

*******************************************

Jeffco

*******************************************

DRYER PART *THERMOSTAT

* Jeffco MODEL # K7 & J316, J316t and J316x

* Thermostat Only
* Fits Jeffco Shop Dryer Models # K7 & # J316, J316t and J316x
Note:
Will Also Fit: * Fits Koken/Belmont Venus and Gemni Shop Dryer Model # HM-1000
* Also Fits: Collins Dryer Models # 2000B, 2000W, 2050B and 2100B
* Also Fits: Kaemark KwikSet Dryer #1990-G, Kaemark KwikSet Ion Dryer #1570H & Kaemark KwikSet Heat Wave Dryer #2000
Special Note:
* Fits Venus Dryer that is Made in USA with "HM" in the Model #
* Fits Venus Dryer that is Made in Costa Rica with "C" in the Model #

DRYER PART *THERMOSTAT* Jeffco MODEL # K7 & J316 $ 32.97

************************************

DRYER TIMER

for Jeffco Hair Salon Dryer

(new Design after 10/22/12)

* 60 minute Timer Only
* NEW DESIGN (as of 08/23/2012)
* Fits ONLY : Jeffco Tru Heat Hair Salon Dryer Model #J316 after 8/23/2012
and Jeffco XTRA HOT Hair Salon Dryer Model #J316x -Extra Hot after 10/22/2012
* New Design is Square shape

* Dimension: 2" wide x 1-11/16" deep x 1-11/16" Tall (including knob post) with 2 electrical connecting Post

* Attached to dryer with 2 screws (NOT included (use the two screws from the old timer)

* printed on side: "DKJ-Y"

E188821 15A 125V/AC 40006336 16A 250V/AC

Hangzhou Franden Electrical Manufacture Co.,LTD

UPC: 97979720119148
MPC: 20119N

DRYER TIMER for Jeffco Hair Salon Dryer $ 49.50

************************************

DRYER PART

* HOOD BAND *

Fits, Jeffco K7, J316, J316T, J316X K500 & 2200 Dryers

* Fits Jeffco Shop Dryer Model # K 7, J316, J316T, J316X, True Heat, K500 Apollo & 2200 Sol-Air Dryers
* 7/16" wide "U" Shape Cannel x 47-1/8" Long ( approximately 15.25" Diameter)
* with a Hook on one end and a Clip with a Spring on other end
* Material Light Weight Aluminum
* May fit other salon dryer hoods, check your measurements against above to determine if this will fit your dryer.

DRYER PART * HOOD BAND * Jeffco K7 Dryer $ 27.99

****************************************

DRYER PART * HOOD BAND * Fits, Jeffco K5 Dryer

item # 979797043784

* Fits Jeffco Shop Dryer Model # K 5

* 7/16" wide "U" Shape Cannel x 44-1/4" Long ( approximately 14.09" Diameter)

* with a Hook on one end and a Clip with a Spring on other end *

Material Light Weight Aluminum

* Fits: Jeffco Model # K 5 Dryer Hoods ONLY !!!

* Look for the Model K5 on the manufactures plate on back of dryer towards the bottom

Special Order! Please allow 2 - 5 days to ship then 3 - 10 days to deliver

Price: $ 35.99

****************************************

DRYER PART * FILTER * Jeffco K7 Dryer

* Fits Jeffco Shop Dryer Model # K 7
* Polycell Foam Filter
* Size: 2" wide x 5" long x 1/2" Thick
* Fits ONLY Jeffco Model # K 7 Dryer Hoods

DRYER PART * FILTER * Jeffco K7 Dryer $ 6.50

*********************************************

DRYER PART Counterbalance Spring * Jeffco K7 Dryer

* Dryer part Counterbalance Spring for Stack
* Fits Jeffco Shop Dryer Model # K 7
* Metal Spring Size: 1" wide X 1-3/4" Dia.
* With "U" Shape End that is Attached to Inner Stack
* This is the part that attaches to the inner stack that allows the outer stack to sliding up and down so the hood can be adjusted to the right Height for each customer (Short customer or a Tall customer)

** NOTE:
Sometimes the "U" shape end breaks off after years of use.
Be SURE to remove broken part out of dryer so it will not damage the fan blade.

DRYER PART Counterbalance Spring * Jeffco K7 Dryer $ 18.00

************************************

ASSEMBLY INSTRUCTIONS

DRYER CART w/Wheels & HANDLE

CART ** ONLY ** - FITS SALON DRYER * with WHEELS

"Dryer NOT Included"

FITS:

* Fits: Jeffco # J316, J316t & J316x also fits all Collins Comfort Aire, Koken Venus and Gemini and other dryers
* For: CABINET SIZE 12-1/4" Wide X 6-1/2" Deep X 23" High
* Two-Wheel Cart with Handle (Only 10 screws to install cart)

DRYER CART w/Wheels & HANDLE $ 49.99

_______________________________________________________________

CacheBeauty.com is the source for the finest in beauty salon equipment!

Other items of interest: index of products

Curling Irons