Will This Fit My Dryer ???

This Motor will Only Fit Large Salon Dryers with Model # J316 !!! Where can I find the model number of my dryer ? Look on the Back of the Dryer, the manufactures production tag is usually on the bottom right or bottom left on the back of the dryer.

If it states "Model J316" then this motor will fit your dryer.

* Motor and Blower Wheel

Fits Salon Dryers with Model # J316 New dryers since Augusta 2011 have this New Aluminum Blower Wheel / If your dryer was produced prior to Augusta 2011 it may have the Black Plastic Blower Wheel

** This will replace the Motor with the Black Plastic Blower wheel on the J316 model dryer.

NOTE: The Motor and Blower Wheel is packed in the same box but the wheel will need to be
installed on the motor shaft with a Allen wrench (not included).

Note: The old plastic fan blade (blower wheel) would have to be replaced in a few years because the operator would shut off the dryer and therefore not allowing the dryer to go thru it designed "Cool Down Cycle". Thus the heat in and around the motor would be absorbed in to the plastic fan blade making it weak and brittle before its life expectance. Therefore the New Aluminum engineered fan blade was developed !