Barber Chair Belmont #BB-225 Replacement Parts

Replacement Parts

Takara Belmont / Koken

for model BB-225 Barber Chair

To see the Schematic of this BB-225 Barber Chair click HERE

************************************************************************

Takara BELMONT / Koken

Reclining Mechanism

fits: BARBER Chair MODEL BB-225

* Replacement Part ONLY ! *

$ 195.75

* Replacement Part ONLY !

* Attaches to bracket in back of chair's back
* Replaces unit already in bracket inside of chair's back (see picture).
* Bottom unit overall measurements: 4-3/16" wide X 1-3/8" thick (yoke) X 12-3/4" Tall
* Steel Rod with pinch bars in middle (top) of unit
* Reclining Levers on Right & Left side of chair's back operates this mechanism
* Color: Steel with cast iron steel yoke

* Reclining Mechanism ONLY !

Fits ONLY Takara Belmont / Koken Barber Chair model BB-225
** Compare your's to picture

* Price shown plus Shipping Cost to your location

* Usually (1) in stock

** If more is need please allow 1 - 2 Weeks to ship then delivered in 3 - 10 Business Days

** THIS ITEM IS NON-RETURNABLE **

Why would you ever need this part ?

* You may need to replace this part as the chair gets older as the pinch bars and steel rod ware-out over time not allowing the back to stay in the recline position that you set it at.
To see the Schematic of this BB-225 Barber Chair click HERE

*********************************************************

Takara Belmont / Koken

Classic E

Electric Hydraulic Base

"NEW Style Since 2017"

* Complete Electric Hydraulic Base ONLY !

* Basically everything from the bottom of the seat down.
* Includes, BS-BCE Hydraulic Pump, Base Plate is Brush Chrome with Black Rubber Base Ring

* Pump Cover is available in Black or White

* Replacement Hydraulic Base for the discontinued E4C electric Pump

* Fits ONLY Takara Belmont / Koken Chair (mostly barber chairs)
* MPC: Black pump cover BS-BCEB and White pump cover BS-BCEW

* Price shown plus Shipping Cost to your location

** Also NOTE:
Since the Complete Replacement Electric Hydraulic Base will be drop-shipped from Belmont, Belmont will collect state sales tax in states they have a presence in.

If this is the case, we will contact you before shipping to confirm total cost.
Known states included are
CA, CT, FL. GA, IL, KY, MD, MA, MN, MO, NJ, NY, NC, OH, PA, TX, WA

Special Order item !!!
Please allow 3 - 10 Days to ship then delivered in 3 - 10 Business Days

*** THIS ITEM IS NON-RETURNABLE ***

Black item # 0982682195024

White item # 0982682195239

(MSRP) Manufacturer's Suggested Retail Price ~~$ 2,000.00~~

Cache's Price:

$ 1,500.00

Specifications:

Hydraulic base and pump cover

Base Plate: Brush Chrome with Black Rubber Base Ring

Voltage: 120V

Power Rating: 50/60 Hz

Current: 5.6/3.7 A

Diameter: 24"

Height: 16"

Stroke: 8"

To see the Schematic of this BB-225 Barber Chair click HERE

**********************************************************

Takara BELMONT / Koken

Complete Replacement Hydraulic Base

fits: BARBER Chair MODEL BB-225

* Replacement Part ONLY !

List: ~~$ 1030.00~~ Our Price $ 829.00

Takara Belmont / Koken
model BARBER Chair PART:
Complete Replacement Hydraulic Base

* Replacement Part ONLY !

* Basically everything from the bottom of the seat down.
* Includes, K25 Hydraulic Pump, K25 Chrome Base Plate, K25 Foot Treddle, and K25 Rubber Base Ring.

* Complete Replacement Hydraulic Base ONLY !

Fits ONLY Takara Belmont / Koken Barber Chair model BB-225
** Compare your's to pictures

UPC: 0982681811253
MPC: K25

* Price shown plus Shipping Cost to your location

(Approximate shipping cost; East Coast: $ 117.87

* Mid U.S.: OH, IN, IL, WI, IW, MN, AL, MS, LA, MO, AR, $ 128.50

* Midwest: KS, SD, ND, TX, CO, NV, NM, $ 145.50 * West: WY, MT, AZ, UT, ID, CA, WA, OR, $ 155.78)

** Also NOTE:
Since the Complete Replacement Hydraulic Base will be drop-shipped from Belmont, Belmont will collect state sales tax in states they have a presence in.

If this is the case, we will contact you before shipping to confirm total cost.
Known states included are
CA, CT, FL. GA, IL, KY, MD, MA, MN, MO, NJ, NY, NC, OH, PA, TX, WA

Special Order item !!!
Usually ships in 3 - 7 Days then delivered in 3 - 10 Business Days

* THIS ITEM IS NON-RETURNABLE

To see the Schematic of this BB-225 Barber Chair click HERE

SEE ALSO ELECTRIC Hydraulic PUMP PARTS

*****************************************************

Takara Belmont / Koken
model BB-225 BARBER Chair PART:
Fantasy Adapter

for Seat Casting

( fits new pump onto old chair )

0982688107243

List: ~~$ 63.50~~ Our Price $ 53.50

FANTASY BASE ADAPTER COLLAR
use when changing from RH to K25 pump

* Replacement Part ONLY !

* This Adapter is a collar that will slide over the top of the New (K25) Pump Shaft and fit up into the seat casting on the bottom of the seat on a older chair that had the RH pump.
* This part is needed to adapt the old RH pump seat casting to the NEW K25 pump shaft.
* The Adapter has a slot that goes over the roll pin that is already in the shaft
* Top measures: 29/32" I.D., 1-1/8" O.D.
* Bottom measures: 1-1/32" I.D., 1-7/32 O.D.
* Heigth: 1-3/32" Tall,
* Roll Pin Opening: 1/4" wide X 1/2" Tall
* Fantasy Adapter ONLY !

Fits ONLY Takara Belmont / Koken Barber Chair model BB-225

UPC: 0982688107243
MPC: Fantasy Adapter

Usually one (1) in stock if more are need please allow 3 - 7 days to ship then 3 - 10 days to deliver.

** Also NOTE:
Since this item will be drop-shipped from Belmont, Belmont will collect state sales tax in states they have a presence in. If this is the case, we will contact you before shipping to confirm total cost.
Known states included are
CA, CT, FL. GA, IL, KY, MD, MA, MN, MO, NJ, NY, NC, OH, PA, TX, WA

* THIS ITEM IS NON-RETURNABLE

To see the Schematic of this BB-225 Barber Chair click HERE

*************************************************************

Takara BELMONT / Koken

RUBBER BASE RING

fits: BARBER Chair MODEL BB-225

* Replacement Part ONLY ! *

List: ~~$ 137.50~~ Our Price $ 122.00

Takara Belmont / Koken
model BB-225 BARBER Chair PART:
RUBBER BASE RING

* RUBBER BASE RING for Barber Chair Elegance MODEL BB-225
* Attaches to 23" Diameter Hydraulic Base
* Approximate Measurements: 23" Dia. X 1.5" tall X 3" Wide
* Color: Black
* Material: Rubber
* Stops chair base from cutting into or marking the floor

** Note: It is a MUST for the Belmont model BB-225 Barber Chair

** NOTE:

NO OTHER BASE RING WILL FIT PROPERLY !!!

UPC: 0982682250013
MPC: RT225001

Fits ONLY Takara Belmont / Koken Barber Chair model BB-225 with K25 Hydraulic Base
** Compare your's to pictures

* Price shown plus Shipping Cost to your location

** Also NOTE:
This item may be drop-shipped from Belmont, Belmont will collect state sales tax in states they have a presence in. If this is the case, we will contact you before shipping to confirm total cost.
Known states included are
CA, CT, FL. GA, IL, KY, MD, MA, MN, MO, NJ, NY, NC, OH, PA, TX, WA

* Often 2 pieces in stock but if out of stock or more need then Please allow
14 days to ship then 3 - 7 days to deliver

* THIS ITEM IS NON-RETURNABLE

To see the Schematic of this BB-225 Barber Chair click HERE

******************************************************************

Takara BELMONT / Koken

TOWEL BAR

fits: BARBER Chair MODEL BB-225

* Replacement Part ONLY ! *

List: ~~$ 43.75~~ Our Price $ 30.97

Takara Belmont / Koken Elegance
model BB-225 BARBER Chair PART:
TOWEL BAR

* TOWEL BAR for Barber Chair Elegance MODEL BB-225
* Attaches underneath arm rest (right or left) with bolts or screws (Not included)
* Approximate Measurements: 3/16" Dia. Steel Rod X 2" tall X 10" long
* Color: Chrome
* AKA: Cape Holder
* TOWEL BAR ONLY !

UPC: 0982680208146
MPC: RT22520814

Fits ONLY Takara Belmont / Koken Barber Chair model BB-225

** Compare your's to pictures

* Price shown plus Shipping Cost to your location

Usually (1) in stock. If more is needed then please allow 1 - 4 Weeks to ship then delivered in 3 - 10 Business Days

* THIS ITEM IS NON-RETURNABLE

To see the Schematic of this BB-225 Barber Chair click HERE

***************************************************************

Takara BELMONT / Koken

STROP HOLDER

fits: BARBER Chair MODEL BB-225

* Replacement Part ONLY ! *

List: ~~$ 33.75~~ Cache's Price $ 21.50

Takara Belmont / Koken Elegance
model BB-225 BARBER Chair PART:

STROP HOLDER

* Fits Takara Belmont Barber Chair Elegance MODEL BB-225
* Attaches underneath right armrest
* Approximate Measurements: 2" Dia.
* Material: Chrome Steel Rod
* Color: Chrome
* Item # 208-18 on the schematic
* STROP HOLDER ONLY !

UPC: 0982680208184
MPC: 208-18

Fits ONLY Takara Belmont / Koken Barber Chair model BB-225

** Compare your's to pictures

* Price shown plus Shipping Cost to your location

Usually (1) in stock. If more is needed then please allow 1 - 4 Weeks to ship then delivered in 3 - 10 Business Days

* THIS ITEM IS NON-RETURNABLE

To see the Schematic of this BB-225 Barber Chair click HERE

***************************************************************

Takara BELMONT / Koken

Reclining KNOB

fits: BARBER Chair MODEL BB-225

* Replacement Part ONLY ! *

List: ~~$ 37.75~~ Our Price $ 33.00

Takara Belmont / Koken Elegance
model BB-225 BARBER Chair PART:
Reclining KNOB

* Reclining KNOB (new style) for Belmont Barber Chair Elegance MODEL BB-225
* Sold Individually
* Interchangeable for RIGHT & LEFT side
* NEW STYLE Attaches with key and set screw ((not included) reuse yours)!
* NOTE: The old style knob (no longer available) fasten to chair with a Roll Pin
* Approximate Measurements: 7/8" wide X 1-1/8" deep X 3-3/4" tall
* Color and Material: Chrome Cast Steel
* Part # 602-4 on the schematic
* Replacement Part ONLY !
* Fits ONLY Takara Belmont / Koken Barber Chair model BB-225
* Compare your's to pictures
* One (1) Reclining KNOB ONLY !

* Usually (4) in stock if more is needed please allow 2 - 3 weeks to ship then delivered in 3 - 10 Business Days

UPC: 08653522560242
MPC: 225602-4

* THIS ITEM IS NON-RETURNABLE

To see the Schematic of this BB-225 Barber Chair click HERE

***************************************************************

Takara BELMONT / Koken Right Front Arm Cap with Hole fits: BARBER Chair MODEL BB-225

* Replacement Part ONLY !

09826820891885

Price: $ 97.75

Barber Chair PART: RIGHT ARM FRONT PIECE, (with HOLE for ashtray (NOT included))

* Fits: Takara Belmont / Koken Elegance Barber Chair model Elegance # BB-225

* Chrome RIGHT ARM FRONT PIECE

* Attaches front of arm rest (right side)

* Approximate Overall Measurements: 2-5/8" wide X 1.75" tall X 4-1/2" long

* Hole on the right end top of this Front Arm Cap is for the manicure bowl ring to fit into (manicure bowl and ring NOT included)

* This Chrome Front Arm Cap (arm front piece) is held onto the right arm with four (4) screws thru the bottom (4 screws ar NOT included)

* Color: Chrome * AKA: Front Arm Cap

* Right Chrome ARM FRONT PIECE ONLY ! * Usually One (1) in stock.

** If more needed then Please allow 14 DAYS to ship then 3 - 10 days to deliver

** ashtray NOT included !!! ( for ashtray see item # 0982685208103 )

*** THIS ITEM IS NON-RETURNABLE ***

To see the Schematic of this BB-225 Barber Chair click HERE

***************************************************************

Takara BELMONT / Koken Ash Tray fits: BARBER Chair MODEL BB-225

* Replacement Part ONLY !

0982685208103

Price: $ 38.75

Barber Chair PART: ASHTRAY for Barber Chair

* Fits: Takara Belmont / Koken Elegance Barber Chair model Elegance # BB-225

* Fits into front of arm rest (usually right arm) but could fit into the left arm if the left arm has hole opening in it for ash tray.

* Approximate Measurements: 2-5/16" length X 1-13/16" deepth X 1-1/4" height

* Color: Chrome * Usually One (1) in stock.

** If more needed Please allow 3 - 6 DAYS to ship then 3 - 10 days to deliver

*** THIS ITEM IS NON-RETURNABLE ***

To see the Schematic of this BB-225 Barber Chair click HERE

***************************************************************************

Takara BELMONT / Koken LEFT Front Arm Cap fits: BARBER Chair MODEL BB-225

* Replacement Part ONLY !

0982682089125

Price: $ 97.75

Barber Chair PART: LEFT ARM FRONT PIECE

* Fits: Takara Belmont / Koken Elegance Barber Chair model Elegance # BB-225

* Chrome LEFT ARM FRONT PIECE

* Attaches front of arm rest (left side)

* Approximate Overall Measurements: 2-5/8" wide X 1.75" tall X 4-1/2" long

* Hole on the left end top of this Front Arm Cap is for the manicure bowl ring to fit into (manicure bowl and ring NOT included)

* This Chrome Front Arm Cap (arm front piece) is held onto the right arm with four (4) screws thru the bottom (4 screws are NOT included)

* Color: Chrome * AKA: Front Arm Cap

* Left Chrome ARM FRONT PIECE ONLY ! * Usually One (3) in stock.

** If more needed then Please allow 14 DAYS to ship then 3 - 10 days to deliver

* This Item # 0982682089125

*** THIS ITEM IS NON-RETURNABLE ***

To see the Schematic of this BB-225 Barber Chair click HERE

***************************************************************************

Takara BELMONT / Koken Right Front Arm Cap without Hole fits: BARBER Chair MODEL BB-225

* Replacement Part ONLY !

098268208918191

Price: $ 97.75

Barber Chair PART: RIGHT ARM FRONT PIECE, (NO HOLE for ashtray)

* Fits: Takara Belmont / Koken Elegance Barber Chair model Elegance # BB-225

* Chrome RIGHT ARM FRONT PIECE

* Attaches front of arm rest (right side)

* Approximate Overall Measurements: 2-5/8" wide X 1.75" tall X 4-1/2" long

* Hole on the right end top of this Front Arm Cap is for the manicure bowl ring to fit into (manicure bowl and ring NOT included)

* This Chrome Front Arm Cap (arm front piece) is held onto the right arm with four (4) screws thru the bottom (4 screws are NOT included)

* Color: Chrome * AKA: Front Arm Cap

* Right Chrome ARM FRONT PIECE ONLY ! * Usually One (1) in stock.

** If more needed then Please allow 14 DAYS to ship then 3 - 10 days to deliver

*This item # 098268208918191

*** THIS ITEM IS NON-RETURNABLE ***

To see the Schematic of this BB-225 Barber Chair click HERE

***************************************************************

Takara Belmont / Koken Elegance
model BB-225 BARBER Chair PART:
FOOT GLIDE

09826822541375

$ 44.00

Replacement Part ONLY !
* Screws into bottom of Platform (front step to get into chair)
* 1 only FOOT GLIDE per package
* Appoximate Bolt size: 5/16" wide X 16/inch thread count
* Hard Rubber Glide is appoximantely 1-5/8" Diameter
* Overall Length: 2.5" long
* Chrome Steel Bolt with Rubber Base to support Platform (footrest)
* Bolt shape is: All Threaded
* One (1) Glide ONLY !
* Fits ONLY Takara Belmont / Koken Barber Chair model BB-225
** Compare your's to pictures
* Usually (1) in stock, if more are needed Please allow 3 - 4 days to ship then delivered in 3 - 10 Business Days

Item # 09826822541375

* THIS ITEM IS NON-RETURNABLE

To see the Schematic of this BB-225 Barber Chair click HERE

See the Foot Glide for the Takara / Belmont LEGACY Barber Chair model BB-0090 HERE

See the Foot Glide for the some imported styling chairs HERE

************************************************************************

Takara Belmont / Koken Elegance
model BB-225 BARBER Chair PART:

Sash for Apron * Upper and Lower

Item # 098268617108 * Upper

Item # 098268618105 * Lower

Item # 098268617108 * Upper

Item # 098268618105 * Lower

Replacement Part ONLY !

BELMONT UPPER SASH
* Chrome Top part of apron.
* Fits ONLY Takara Belmont / Koken Barber Chair model BB-225
* TOP Sash * when setting in the chair this item would be under your leg calf )
* A chrome part going from the right to left side to hold the Apron on to the chair.
* The Upper Sash has a channel that the top of the apron fits into so the top edge of the apron is not exposed.
* #411 Upper Sash in schematic of BB-225 Barber Chair
* Bolts (see bolts & nuts below) onto the side of "Goosenecks" #406-1R (right) and 406-1L (left) in schematic
* Appoximate size: 15.75" wide X 13/16 inch Tall X 1.75 Deep
* Sash has a 1.75" Curvature
* UPPER SASH Only.
** Compare yours to pictures shown
** SPECIAL ORDER part * please allow 14 days to ship and then 3 - 10 days to deliver.

Belmont BB-225 Barber Chair Part * Upper Sash

$ 65.50

**************************

Item # 098268618105 * LOWER

Replacement Part ONLY !

BELMONT LOWER SASH
* Chrome Top part of apron.
* Fits ONLY Takara Belmont / Koken Barber Chair model BB-225
* TOP Sash * when setting in the chair this item would be under your leg calf )
* A chrome part going from the right to left side to hold the Apron on to the chair.
* #411 Lower Sash in schematic of BB-225 Barber Chair
* Bolts (see bolts & nuts below) onto the side of "Goosenecks" #406-1R (right) and 406-1L (left) in schematic
* Appoximate size: 15.75" wide X 13/16 inch Tall X 1.75 Deep
* Sash has a 1.75" Curvature
* LOWER SASH Only.
** Compare yours to pictures shown
** SPECIAL ORDER part * please allow 14 days to ship and then 3 - 10 days to deliver.

Belmont BB-225 Barber Chair Part * Lower Sash

$ 65.50

To see the Schematic of this BB-225 Barber Chair click HERE

See the Foot Glide for the Takara / Belmont LEGACY Barber Chair model BB-0090 HERE

See the Foot Glide for the some imported styling chairs HERE

************************************************************************

Takara Belmont / Koken Elegance
model BB-225 BARBER Chair PART:

Apron Sash Fixing Plates * Upper and Lower

The Fixing Plates are not shown on the schematic. They are on the backside of the #411 Sashes

Item # 09826850168216

The Fixing Plates are on the backside of the Apron's Upper and Lower Sashes

Item # 09826850168216

View

Item # 09826850168216

Replacement Parts ONLY !
* Both Upper and Lower Apron Sash Fixing Plates is the backside frame srtip.
* Backside Steel Bar that attaches to each Sash and also attaches to chair legs.
* (2) FIXING PLATES per package (both are the same)
* Approximate Size: 16-11/16" Long X 5/8" Wide X 1/8 Thick
* 3/16" Bolt Hole on each end
* 1/4" x 7/16" Vertical Slot, Slotted for micro adjustment
* 1/4" x 7/16" Horzontal Slot, 2-1/2" from each end, Slotted for micro adjustment
* Shape is: Slight Curve
* Fits ONLY Takara Belmont / Koken Barber Chair model BB-225
** Compare your's to pictures
** Special Order part. Please allow 2 - 3 weeks to ship then delivered in 3 - 10 Business Days

Item # 09826850168216

* THIS ITEM IS NON-RETURNABLE

Belmont BB-225 Barber Chair Part * Apron Sash Fixing Plates (2)

$ 36.00

To see the Schematic of this BB-225 Barber Chair click HERE

************************************************************************

Takara Belmont / Koken Elegance
model BB-225 BARBER Chair PART:

Bolts & Nuts (4 of each) to hold Upper & Lower Sashes on to chair

Item # 09826818202006

Replacement Part ONLY !
* Bolts slide through the side of Gooseneck an through the Fixing Plate where the Nut then
attaches into the chair's Upper and Lower Sashes (4-bolts & 4-Nuts) to hold the Sashes and Apron onto chair
* Approximate Bolt size: : 5mm wide X 19mm long X 13mm thread length
* Bolt shape is: Phillips Drive, Oval Beveled (Countersunk) Head, All Thread
* Color: Chrome Steel
* Four (4) Bolts and Four (4) Nuts ONLY !
* Fits ONLY Takara Belmont / Koken Barber Chair model BB-225
** Compare yours to pictures shown
* Usually 1 set in stock, if more are needed Please allow 2 - 3 weeks to ship then delivered in 3 - 10 Business Days

Item # 09826818202006

* THIS ITEM IS NON-RETURNABLE

Belmont BB-225 Barber Chair Part * Bolts & Nuts (4 of each) to hold Sashes on to chair

$ 16.99

To see the Schematic of this BB-225 Barber Chair click HERE

************************************************************************

Takara Belmont / Koken Elegance
model BB-225 BARBER Chair PART:

BOLT (# 417-4 in schematic) that connects the (# 417-1) Reclining Connecting Bar and the (# 406-1)(R&L) Gooseneck

Item # 098255364107

Replacement Part ONLY !
* BOLT (# 417-4 in schematic) that connects the (# 417-1) Reclining Connecting Bar and the (# 406-1)(R&L) Gooseneck.
* The Bolt (417-4) bolts through the (417-1) into chair's Gooseneck (406-1R)(right) or (406-1L)(left)
* Bolt shape is: Flat Head, Phillips Drive, Countersunk
* Color: Chrome Steel
* Approximate Metric Bolt size: 8mm wide X 38mm long with 20 thread count
* Fits ONLY Takara Belmont / Koken Barber Chair model BB-225
* Two Bolts (2) per package Only
** Compare yours to pictures shown

* Usually 1 set in stock, if more are needed Please allow 2 - 3 weeks to ship then delivered in 3 - 10 Business Days

Item # 098255364107

* THIS ITEM IS NON-RETURNABLE

Belmont BB-225 Barber Chair Part * 2 - Bolts to connect the Reclining Connecting Bar and the Gooseneck.

$ 21.00

To see the Schematic of this BB-225 Barber Chair click HERE

************************************************************************

Takara Belmont / Koken Elegance
model BB-225 BARBER Chair PART:

BOLT and Nut (# 417-7 in schematic)
That connects the (# 417-1) Reclining Connecting Bar and the (# 417-6) Reclining Connecting Bar for Platform

Item # 092151099101

Replacement Part ONLY !
* BOLTS (# 417-7 in schematic) connects the (417-1) Reclining Connecting Bar and the (417-6) Reclining Connecting Bar for Platform
* The Bolt (417-7) bolts through the Reclining Connecting Bar (417-1) and through the Reclining Connecting Bar for Platform (417-6)
* Bolt shape is: Hex Head, Wrench Drive, Sholder bolt
* Color: Chrome Steel
* Approximate Metric Bolt size 8x25: 8mm wide X 25mm long X 15 thread count
* Fits ONLY Takara Belmont / Koken Barber Chair model BB-225
* Two Bolts (2) per package Only
** Compare yours to pictures shown

* Usually 1 set in stock, if more are needed Please allow 2 - 3 weeks to ship then delivered in 3 - 10 Business Days

Item # 092151099101

* THIS ITEM IS NON-RETURNABLE

Belmont BB-225 Barber Chair Part * 2 BOLTS (# 417-7) connects the Reclining Connecting Bar and the Reclining Connecting Bar for Platform.

$ 16.00

To see the Schematic of this BB-225 Barber Chair click HERE

************************************************************************

Takara Belmont / Koken Elegance
model BB-225 BARBER Chair PART:

Half Thread Platform Bolts (2)

Item # 0982684170708

Replacement Part ONLY !
* Bolts slide thru the side of Gooseneck an into the chair's foot rest Platform (2-bolts) to hold the Platform section allowing it to swivel.
* Approximate Bolt size: : 22.2mm wide X 20.6mm long X 5.55mm thread
* Bolt shape is: Flat Head, Shoulder, Half Thread
* Color: Chrome Steel
* Two (2) Bolts ONLY !
* Fits ONLY Takara Belmont / Koken Barber Chair model BB-225
** Compare your's to pictures
* Usually 4 sets in stock, if more are needed Please allow 2 - 3 weeks to ship then delivered in 3 - 10 Business Days

Item # 0982684170708

* THIS ITEM IS NON-RETURNABLE

Belmont BB-225 Barber Chair Part * Half Thread Platform Bolts (2)

$ 33.97

To see the Schematic of this BB-225 Barber Chair click HERE

***********************************************************************************

Takara Belmont / Koken Elegance
model BB-225 BARBER Chair PART:

SETTING PIN for PLATFORM (2)

Item # 0982684130207

Replacement Part ONLY !
* Setting Pin threads into the inside of the bottom of the Gooseneck of chair to support the footrest Platform.
The bottom of the Platform right and left edge sets upon the shoulder of this bolt, acting as a stop pin.
* Approximate Bolt size: : 1.5mm wide X 3.5mm long X 1.25mm thread
* Bolt shape is: HEX Head, Shoulder, Half Thread
* Color: Chrome Steel
* Two (2) Bolts ONLY !
* Fits ONLY Takara Belmont / Koken Barber Chair model BB-225
** Compare your's to pictures
* Usually 4 sets in stock, if more are needed Please allow 2 - 3 weeks to ship then delivered in 3 - 10 Business Days

Item # 0982684130207

* THIS ITEM IS NON-RETURNABLE

Belmont BB-225 Barber Chair Part * SETTING PIN for PLATFORM (2)

$ 33.97

To see the Schematic of this BB-225 Barber Chair click HERE

***********************************************************************************

Takara Belmont / Koken Elegance
model BB-225 BARBER Chair PART:
Replacement ARMREST

Right Armrest #098268208184 and Left Armrest # 0982682081129

$ 298.97 each

Replacement Part ONLY !
* BELMONT LEFT ARMREST * Fits BB-225 Barber Chair
* "LEFT" Side ARM REST Only ( when setting in the chair this would be your Left Side)
* a Molded Plastic BLACK upholstered part
* Bolts on to chair arm frame with two bolts protruding from bottom of arm
* BLACK Vinyl Upholstery (Other Colors available for additonal cost and up to 16 weeks to ship)
* fits Belmont Barber Chair model BB-225
* Please allow 3 - 4 weeks to ship then delivered in 3 - 10 Business Days

* THIS ITEM IS NON-RETURNABLE

Replacement Part ONLY !
* BELMONT RIGHT ARMREST * Fits BB-225 Barber Chair
* "RIGHT" Side ARM REST Only ( when setting in the chair this would be your Right Side)
* a Molded Plastic BLACK upholstered part
* Bolts on to chair arm frame with two bolts protruding from bottom of arm
* BLACK Vinyl Upholstery (Other Colors available for additonal cost and up to 16 weeks to ship)
* fits Belmont Barber Chair model BB-225
* Please allow 3 - 4 weeks to ship then delivered in 3 - 10 Business Days

* THIS ITEM IS NON-RETURNABLE

To see the Schematic of this BB-225 Barber Chair click HERE

***********************************************************************************

Takara Belmont / Koken Elegance
model BB-225 BARBER Chair PART:
UPHOLSTERY * CUT & SEWN for ARMREST

Upholstery Right Armrest #0982682530184 and Upholstery Left Armrest # 0982682530122

$ 198.50 each

Replacement Part ONLY !
BELMONT Cut and Sewn Upholstery for LEFT Armrest fits Belmont BB-225 Barber Chair
* CUT and SEWN UPHOLSTERY * ONLY! for "LEFT" Side ARM REST Only (when setting in the chair this would be your Left Side)
* BLACK upholstered that is cut and sewn for the LEFT Arm
* The customer will remove the old upholstery buy removing the staples and then remove the vinyl upholstery.
* Then Replace by streaching the new upholstery over the arm and staple into place.
* NOTE: Do not remove the bottom upholestery of the Chrome front cover area, as No upholstery for that area come with this item.
* BLACK Vinyl Upholstery (Other Colors available for additonal cost and up to 16 weeks to ship)

* Your purchasing Upholstery that is cut and sewn for Left arm ONLY!

* fits Belmont Barber Chair model BB-225
* Please allow 14 days to ship and then 3 - 10 days to deliver.

* THIS ITEM IS NON-RETURNABLE

Replacement Part ONLY !
BELMONT Cut and Sewn Upholstery for RIGHT Armrest fits Belmont BB-225 Barber Chair
* CUT and SEWN UPHOLSTERY * ONLY! for "RIGHT" Side ARM REST Only (when setting in the chair this would be your Right Side)
* BLACK upholstered that is cut and sewn for the RIGHT Arm
* The customer will remove the old upholstery buy removing the staples and then remove the vinyl upholstery.
* Then Replace by streaching the new upholstery over the arm and staple into place.
* NOTE: Do not remove the bottom upholestery of the Chrome front cover area, as No upholstery for that area come with this item.
* BLACK Vinyl Upholstery (Other Colors available for additonal cost and up to 16 weeks to ship)

* Your purchasing Upholstery that is cut and sewn for Right arm ONLY!

* fits Belmont Barber Chair model BB-225
* Please allow 14 days to ship and then 3 - 10 days to deliver.

* THIS ITEM IS NON-RETURNABLE

To see the Schematic of this BB-225 Barber Chair click HERE

***********************************************************************************

Takara Belmont / Koken Elegance
model BB-225 BARBER Chair PART:
SIDE BOLTS

09826818201993

$ 12.79

Replacement Part ONLY !
* Bolts slide thru the side arm bracket of chair (2-bolts) to hold the swivel back bracket
* Two Bolts Only
* Approximate Bolt size: 5/16" wide X 1" long X 24/1" thread count
* Bolt shape is: Oval Head, Phillips Drive, Countersunk, Color: Chrome Steel
* Fits ONLY Takara Belmont / Koken Barber Chair model BB-225
** Compare your's to pictures
* Usually (1 or 2) in stock, if more are needed Please allow 3 - 4 days to ship then delivered in 3 - 10 Business Days

Item # 09826818201993

* THIS ITEM IS NON-RETURNABLE

To see the Schematic of this BB-225 Barber Chair click HERE

***********************************************************************************

Takara Belmont / Koken Elegance
model BB-225 BARBER Chair PART:
SIDE BRACKET ON BACK for LEFT or RIGHT

Item # 09826825305189

$ 69.97

Replacement Part ONLY !
* SIDE BRACKET ON BACK for Left or Right This bracket attaches to the inside of the arm frame by 2 bolts. Bolts NOT included. The bolts slide through the side of the arm frame of the chair.
* This Side Bracket On Back is the Reclining Swivel Back Bracket which is the same for the Left or the Right side.
* This "Side Bracket On Back" is the receptacle for the Reclining Lower Shaft (Part #304-2)
* The "Side Bracket On Back" is attached to the Reclining Lower Shaft with a ROLL PIN (not included) (see Roll Pins below)
* Approximate size: 3" Tall X 1-5/8" Wide X 1-7/8" Deep
* Material: Chrome Cast Steel
* Part # 305-R and 305-L on the schematic
* Fits ONLY Takara Belmont / Koken Barber Chair model BB-225
* One (1) Side Bracket Only

** Compare your's to pictures

* Usually (1 or 2) in stock, if more are needed Please allow 14 days to ship then delivered in 3 - 10 Business Days

Item # 09826825305189

* THIS ITEM IS NON-RETURNABLE

To see the Schematic of this BB-225 Barber Chair click HERE

**************************************************

Takara Belmont / Koken Elegance
model BB-225 BARBER Chair PART:
ROLL PINS
for SIDE BRACKET ON BACK

Item # 0865352253029

Approximate SIZE of roller pin

Roll Pin will be black in color

$ 14.00

Replacement Part ONLY !
* ROLL PINS for SIDE BRACKET ON BACK for left or right
* Approximate size: M6 Diameter X 30mm Long (Metric) Size Roll Pin
* Approximate Size: M6 / 0.24" Diameter X 30mm (Metric) / 1.18" Long * Color / Material: Black Steel
* This Roll Pin has a Slit (1.2mm / 0.05") running from one end to the other (traditional for a roll pin)
* The Roll Pin attaches the Side Bracket On Back (#305L / #305R) to the Reclining Lower Shaft ((#304-2)schematic)
* Part # 302 on the schematic
* Fits ONLY Takara Belmont / Koken Barber Chair model BB-225
* Package of 2 enough for both Side Brackets On Back

** Compare your's to pictures

* Usually (2) in stock, if more are needed Please allow 14 days to ship then delivered in 3 - 10 Business Days

Item # 0865352253029

* THIS ITEM IS NON-RETURNABLE

***************************************************************

Takara Belmont / Koken Elegance
model BB-225 BARBER Chair PART:
BELMONT BACK BRACKET for BB-225 Barber Chair

Item # 0982684191123 ** LEFT

Item # 0982684191185 ** RIGHT

Replacement Part ONLY !
* BELMONT BACK BRACKET * LEFT side * for BB-225 Barber Chair ( when setting in the chair this would be your Left Side, on the bottom of the back of chair.)
* 1 only BACK BRACKET for LEFT side per package
* Appoximate Size: 2-3/4" wide X 2-3/4" deep X 2" tall
* Bolt Hole Size is appoximantely 7.9mm wide X 41.0mm long X 5.55mm thread ** see item # 0982684170203 for Bolt (not included)
* "LEFT" SIDE BACK BRACKET ONLY !
* Schematic number 419-1L
* Fits ONLY Takara Belmont / Koken Barber Chair model BB-225
** Compare your's to pictures
* Usually 1 - 2 in stock, if more are needed Please allow 1 - 2 weeks to ship then delivered in 3 - 10 Business Days

Item # 0982684191123 ** LEFT

* THIS ITEM IS NON-RETURNABLE

To see the Schematic of this BB-225 Barber Chair click HERE

Takara Belmont * Koken Elegance BB-225 Barber Chair Part
BACK BRACKET* LEFT *for BB-225 Barber Chair $ 51.79

*********************************************************

Replacement Part ONLY !
* BELMONT BACK BRACKET * RIGHT side * for BB-225 Barber Chair ( when setting in the chair this would be your Right Side, on the bottom of the back of chair.)
* 1 only BACK BRACKET for RIGHT side per package
* Appoximate Size: 2-3/4" wide X 2-3/4" deep X 2" tall
* Bolt Hole Size is appoximantely 7.9mm wide X 41.0mm long X 5.55mm thread ** see item # 0982684170203 for Bolt (not included)
* "RIGHT" SIDE BACK BRACKET ONLY !
* Schematic number 419-1R
* Fits ONLY Takara Belmont / Koken Barber Chair model BB-225
** Compare your's to pictures
* Usually 1 - 2 in stock, if more are needed Please allow 1 - 2 weeks to ship then delivered in 3 - 10 Business Days

Item # 0982684191185 ** RIGHT

* THIS ITEM IS NON-RETURNABLE

To see the Schematic of this BB-225 Barber Chair click HERE

Takara Belmont * Koken Elegance BB-225 Barber Chair Part
BACK BRACKET* RIGHT * for BB-225 Barber Chair $ 51.79

*******************************************************************************************************

0982684170203 ** BOLTS

Replacement Part ONLY !
* BELMONT BOLTS * fits both right and left side recling back bracket for BB-225 Barber Chair
* 2 BOLTS per package
* Appoximate Size: 7.9mm wide X 41.0mm long X 5.55mm thread area (half-thread)
* Bolt shape is: Hex Head, Shoulder, Half Thread
* Color: Chrome Steel
* BOTH BOLTS ARE THE SAME
* Schematic number 417-2
* Bolts slide thru the side of Reclining Connecting Bar to chair's Reclining Back Bracket
* Fits ONLY Takara Belmont / Koken Barber Chair model BB-225
** Compare your's to pictures
* Usually 1 - 2 in stock, if more are needed Please allow 1 - 2 weeks to ship then delivered in 3 - 10 Business Days

Item # 0982684170203

* THIS ITEM IS NON-RETURNABLE

To see the Schematic of this BB-225 Barber Chair click HERE

Takara Belmont * Koken Elegance BB-225 Barber Chair Part
* 2 - BOLTS fits side reclining back bracket for BB-225 Barber Chair $ 14.00

***************************************************************

Takara BELMONT / Koken

Headrest

fits: BARBER Chair MODEL BB-225

* Replacement Part ONLY ! *

List: ~~$ 511.00~~ Our Price $ 449.99

Takara Belmont / Koken Elegance
model BB-225 BARBER Chair PART:
HEADREST

* Headrest for Barber Chair Elegance MODEL BB-225

* All the Elegance model BB-225 Barber Chairs were built with the headrest bracket that is visible on the top back of chair.
* Approximate Measurements: 7-7/8" wide x 4-5/16" high x 4-1/4" thic
* Color: Black upholstery, Chrome Steel & Aluminum Frame

* HEADREST Only !

UPC: 0982680000818
MPC: RT22520814

Fits ONLY Takara Belmont / Koken Barber Chair model BB-225

** Compare your's to pictures

* Price shown plus Shipping Cost to your location

** Also NOTE:
This item may be drop-shipped from Belmont, Belmont will collect state sales tax in states they have a presence in. If this is the case, we will contact you before shipping to confirm total cost. Known states included are CA, CT, FL. GA, IL, KY, MD, MA, MN, MO, NJ, NY, NC, OH, PA, TX, WA

Please allow 1 - 4 Weeks to ship then delivered in 3 - 10 Business Days

* THIS ITEM IS NON-RETURNABLE

To see the Schematic of this BB-225 Barber Chair click HERE

***************************************************************

Takara BELMONT / Koken

Headrest SHOCK ABSORBER for HEADREST

fits: BARBER Chair MODEL BB-225 Headrest

* Replacement Part ONLY ! *

List: ~~$ 9.99~~ Our Price $ 5.99

Takara Belmont / Koken Elegance
model BB-225 BARBER Chair PART:
SHOCK ABSORBER for HEADREST

* SHOCK ABSORBER for HEADREST for Barber Chair Elegance MODEL BB-225

* This Rubber Bumper is applied to the Chrome Metal Shaft that slides up and down to adjust to the customer head.
This Rubber Bumper keeps the metal part of the headrest from touching the headres bracket.
* Approximate Measurements: 1 3/4" Wide; 3/4" Depth; 5/8" Height
* Color: Black * Shape: "Rectangle"
* Material: Rubber * most often purchased to replace a broken or lost Rubber Bumper

* Rubber Bumper Only !

UPC: 098268070293
MPC: BB225*Headrest Rubber Bumper

Fits ONLY Takara Belmont / Koken Barber Chair model BB-225 Headrest

** Compare your's to picture

Usually 1 - 2 in Stock if out or more needed please allow 2 weeks to ship

* THIS ITEM IS NON-RETURNABLE

Takara BELMONT / Koken

Headrest BRACKET

fits: BARBER Chair MODEL BB-225

* Replacement Part ONLY ! *

List: ~~$ 189.99~~ Our Price $ 174.97

Takara Belmont / Koken Elegance
model BB-225 BARBER Chair PART:
Headrest BRACKET

* Headrest Bracket for Barber Chair Elegance MODEL BB-225

* Traditionally all the Elegance model BB-225 Barber Chairs were built with the headrest bracket
that is visible on the top back of chair.
* Approximate Measurements: 3 1/2" Height; 1 1/2" Depth; 2 3/4" Width
* Color: Chrome Steel * "L" shape

* The mounting bracket is for the chair back
* Fastens to chair back with 4 stainless steel screws (not included)
* you may reuse your screws or acquire at hardware store.
* most often purchased to replace a broken bracket

* BRACKET Only !

UPC: 098268070316
MPC: BB2257031

Fits ONLY Takara Belmont / Koken Barber Chair model BB-225

** Compare your's to pictures

Usually 1 - 2 in Stock if out or more needed please allow 2 weeks to ship

* THIS ITEM IS NON-RETURNABLE

To see the Schematic of this BB-225 Barber Chair click HERE

****************************************************************

Chair Back Cover for Barber Chair BELMONT #BB-225

Fits Belmont Elegance (BB-225) Barber Chair
Product Specs:
* Material: Heavy Clear Vinyl
* Size: 17" W x 3" D x 19" H
* Has Opening for Headrest
* Each Side has Opening for reclining Release Lever
* Each Side has 2 - Velcro tabs that attaches the lower sides to the back to easily install chair back cover
* Fits: Belmont Barber Chair model BB-225

1 *** $ 27.59 each

2 *** 27.19 each

3 - more *** $ 26.87 each

To see the Schematic of this BB-225 Barber Chair click HERE

Chair Back Cover for Barber Chair BELMONT #BB-225 $ 27.59

********************************************************

If you don't purchase online then Fax or Mail the No Risk Order Form.

Phone: 870-972-5300

^Home

Index

Wholesale

E-mail

Shipping Policy