3500 and 3538 Hydralic Pump Repair Info

Model # 3500

Hydraulic 3-1/2" OD REPLACEMENT Pump

*** PUMP ONLY ! ***

* Fits: COLLINS, Jeffco, Kaemark, Veeco, Belvedere, Takara Belmont/Koken & Others *

* This pump mainly used by Belvedere !
* This is a U.S. A. Made pump ONLY !
* Choice of Chrome or Silver Metallic powder coated pumps
* This is JUST the pump. No hardware or base.
* You will need to reuse the Cap & Screw and Foot Treadle & Star base
* Specify as there are 2 -types of Foot Treadle (one"U" shape that joins the pump on both sides of the pump (#3538) (SEE BELOW) and the other Foot Treadle is a "L" shape that joins the pump on only one side (#3500) (as shown here)) See drawings above * Select appropriate shopping cart below.
* Please send picture of pump being replaced to: customerservice@cachebeauty.com (one or more pictures of under the top cap showing the top of the pumps workings)
* Pump MUST measure 3-1/2" (3.5") OD across the top cap
* Pump ONLY !

*** THIS ITEM IS NON-RETURNABLE ***

* Please allow 3 - 8 days to ship and 3 - 10 days to deliver
* Item can ONLY be shipped on UPS GROUND
* Price shown + Shipping cost to your location

****** FITS ONLY U.S.A. MADE PUMPS !!!! ******

Your pump must look like this for this to replace your pump.

This will NOT replace a imported pump !!!

Replacement Hydraulic Fluid should be a ISO Grade 46.

The U.S. manufacture uses and recommends SHELL TURBO® ISO viscosity grade T 46

Amount oil need for this pump: 0.8 Pints

Hydraulic 3-1/2" OD REPLACEMENT Pump #3500 for "L" Shape Foot Treadle * Chrome $ 205.75

Hydraulic 3-1/2" OD REPLACEMENT Pump #3500 for "L" Shape Foot Treadle * Silver Metallic $ 205.75

*********************************************

Salon Chair 3-1/2" O.D. Hydraulic base Pump REPAIR KIT

* Fits: COLLINS, Jeffco, Kaemark, Veeco & Others *

The parts fit U. S. A. Made 3-1/2" O.D. Hydraulic pump that is only used on Star Base (5-Leg) like: Collins Slim-Star Base
* Fits Collins, Jeffco, Veeco, Kaemark, Belvedere, Belmont and many other brands

** The 3-/12" measurement is across the Top Pump Cap

* 3-1/2" O.D. Standard Hydraulic Pump Repair Kit consists of the following parts:
* One O-Ring, Plunger Sleeve - part # HLP-3516
* Two O-Ring, Casting - part # HLP-3530
* Two Seal Nut- part HLP-3536
* One Top Seal - part # HLP-4032
* One U-cup - part # HLP-5509
* Two Quad Ring - part # HLP-5512
* One O-Ring for bottom of socket tube (has a yellow dot on it) - part # HLP-5587

*** THIS ITEM IS NON-RETURNABLE ***

PLEASE NOTE:
* Replace HLP-3516 O-Ring only if Plunger is removed
* Replace HLP-5587 O-Ring only if Socket Tube is Removed

Replacement Hydraulic Fluid should be a ISO Grade 46.

The U.S. manufacture uses and recommends SHELL TURBO® ISO viscosity grade T 46

Amount oil need for this pump: 0.8 Pints

****** FITS ONLY U.S.A. MADE PUMPS !!!! ******

Salon Chair 3-1/2" O.D. Hydraulic base Pump REPAIR KIT $ 34.97

Hydraulic 3-1/2" OD REPLACEMENT Pump

*** PUMP ONLY ! ***

* Fits: COLLINS, Jeffco, Kaemark, Veeco & Others *

Replacement Pump ONLY
* This Pump replaces ONLY U. S. A.. Made 3-1/2" O.D. Hydraulic pump that is only used on Star Base (5-Leg) like: Collins Slim-Star Base
* Fits Collins, Jeffco, Veeco, Kaemark, Belvedere, Belmont and many other brands
* This is a U.S. A. Made pump ONLY !
* Choice of Chrome or Silver Metallic powder coated pumps
* This is JUST the pump. No hardware or base.
* You will need to reuse the Cap & Screw and Foot Treadle & Star base
* Specify as there are 2 -types of Foot Treadle (one"U" shape that joins the pump on both sides of the pump (#3538) and the other Foot Treadle is a "L" shape that joins the pump on only one side (#3500)) See drawings above * Select appropriate shopping cart below.
* Please send picture of pump being replaced to: customerservice@cachebeauty.com (one or more pictures of under the top cap showing the top of the pumps workings)
* Pump MUST measure 3-1/2" (3.5") OD across the top cap
* Pump ONLY !

*** THIS ITEM IS NON-RETURNABLE ***

* Please allow 3 - 8 days to ship and 3 - 10 days to deliver
* Item can ONLY be shipped on UPS GROUND
* Price shown + Shipping cost to your location

Replacement Hydraulic Fluid should be a ISO Grade 46.

The U.S. manufacture uses and recommends SHELL TURBO® ISO viscosity grade T 46

Amount oil need for this pump: 0.8 Pints

****** FITS ONLY U.S.A. MADE PUMPS !!!! ******

Hydraulic 3-1/2" OD REPLACEMENT Pump #3538 for "U" Shape Foot Treadle * Chrome $ 185.42

Hydraulic 3-1/2" OD REPLACEMENT Pump #3538 for "U" Shape Foot Treadle * Silver Metallic (most common) $ 185.42

***********************************************************

See Complete Slim-Star Base here

If you don't purchase online then Fax or Mail the No Risk Order Form.

Phone: 870-972-5300

^Home

Index

Wholesale

E-mail

Shipping Policy