![]() ...Proudly Keeping America Beautiful since 1976 ! |
Phone: 870-972-5300 |
Product Categories |
|
Replacement Gas Cylinder
for the back of
JEFFCO BARBER CHAIR
Replacement Gas Cylinder
* This Part will fit many reclining back Barber Chairs
(mostly imported barber chairs) ** you will only know if your cylinder measurements match the measurements listed here. This Part Will fit Jeffco brand Barber Chair model # 109 Extra
* Total length of the cylinder, measure from the end of the mounting bracket to the end of the push button on the rod end : 15.25" long
* The length of the Body of the Cylinder: 9-1/8" long
* The measurement from the bottom of the Body of the Cylinder to the Center of the Bolt Hole in the mounting bracket: 10" long
Description:
Fits in reclining back of Barber Chair to allow easy reclining Approximate Length 15.25" long * Shaft end is threaded with a nut & "U" shape Bracket for releasing cable to be attached to. This end allows the Bracket to be adjusted up and down the shaft by approximately a 1/2" This "U" Bracket measures 1-3/4" long X 1" wide X 7/8" tall, open on one end and 3/8" female threads on the other end. The hole that the pin goes thru is 5/16" dia. The slot opening on one side is 3/16" tall x 3/4" long. The slot opening on the other side is 3/16" tall x 3/8" long. * The other cylinder end has"U" shape bracket with a 5/16" hole thru the side of bracket for pin to go thru. * Replacement Part
* SPECIFY CHAIR MODEL (if you can) Look for Manufactures White Tag attached to bottom of chair it will have Manufacture's Name and Model number of chair. This Part Will fit Jeffco brand Barber Chair model # 109 Extra
**** This Part is NON RETURNABLE ***
*** See Measurements **** **** FINAL SALE **** QUESTIONS before buying call 870-972-5300
|
Replacement Gas Cylinder $ 124.00 |
If you don't purchase online then Fax or Mail the No Risk Order Form.
Phone: 870-972-5300
Home |
Copyright © 1998-2023 Cache Beauty Supply, Inc.
All Rights Reserved